Just south of the German city of Karlsbad, south west of Germany we find HiFi manufacturer OCTAVE, with Andreas Hoffmann at the helm. For more than 30 years they have produced HiFi-electronics, with emphasis on amplifiers. But they also had the preamplifier Phono, which is a complete, modular phono preamp.
Now they launched the pure phono stage OCTAVE Phono EQ.2, a MM / MC RIAA stage. Separate entrances for MM and MC selected via a switchable at the rear.
The impedance is configurable via four switchable and has a span of 62 to 1000 ohms. Also gain is adjustable, where you can choose between 58, 62, 68 and 72 dB. There is also a subsonic filter on board.
Manufacturer Specifications:
Phono moving magnet
- Frequency response +/- 0.25 dB RIAA / 25 Hz - 20 kHz
- Input sensitivity 4 mV
- Gain 50 dB
- Input capacity 220 pF
- Input impedance 47 kohms
- Output impedance 100 ohms
- Signal-to-noise ratio -90 dB / 2.5 V output level
- Maximum input level 19 mV at 1 kHz
- Total harmonic distortion 0.008% at 5.4 V RMS
Phono moving coil
- Frequency response +/- 0.1 dB RIAA / 25 Hz - 20 kHz
- Input sensitivity 100 μV - 1 mV
- Gain 58 dB, 62 dB, 68 dB, 72 dB (adjustable)
- Input impedance 62 ohms - 1 kohm
- Output impedance 100 ohms
- Signal-to-noise ratio (input shortcircuited that gain of 72 dB) -74 dB / 2.5 V output level
- Signal-to-noise ratio (input shortcircuited that gain of 52 dB) -86 dB / 2.5 V output level
- Maximum input level 2.3 mV at 1 kHz
- Total harmonic distortion 0.008% at 5.4 V RMS
General data
- Power consumption <2 W
- Weight of preamplifier 0.8 kg
- Weight of power supply 0.1 kg
- Dimensions of power amplifier Width x height x depth = 100 x 55 x 167 mm
- Dimensions of power supply Width x height x depth = 50 x 55 x 40 mm
- Supplied accessories External power supply
Read more about Phono EQ.2 in OCTAVE Audio